So, let’s go in order by first verifying that the tower is adequate and built in the right manner. First perform the following checks: See that water sprinkling is uniform over the entire surface of the tower. From below, through the air Read More
Mechanical resistance The need for periodic cleaning has affected the strength and easy handling of the material. In fact, in order for people to perform ordinary and extraordinary maintenance operations without compromising the structure of the material, safety became indispensable. Resistance to Read More
The research for the design and implementation of TURBOsplash PAC ®™ filler panels, carried out by the technical staff of the Italian company NERI, lasted several years. In this period the staff performed several laboratory tests and installations in existing towers, both Read More
Wood, for a long time, was the most commonly used filling material in cooling towers. A very old method. For hundreds of years, bundles of woods have been used and arranged randomly inside the tower. The system has evolved when wood plates Read More
The main function of cooling towers consists in cooling water with air flow through a widespread and prolonged contact. In addition to the processes of convection and conduction, heat exchange between water and air also takes place through a process called mass Read More
Water and air, these two elements have been used by mankind for thousands of years to improve their lives. Moreover, thanks to intelligent research and applications, these two natural elements have learned to live together influencing the evolution of humanity itself. In Read More
The most common problems in evaporation towers for cooling industrial water concern mainly the filling material. Some essential characteristics that filling material need to address are resistance to high temperatures, periodic cleaning and also use in presence of dirty water. TURBOsplashPAC ®™ Read More
TURBOsplash PAC ®™ is a bottom supported modular evaporation panel system for making cooling tower fill modules. TURBOsplash PAC ®™ panels are injection molded in polypropylene, constructed with a 300mm (@1 foot) by 600mm (@2 feet) U-channel framework and with a total Read More
The following diagrams shows the change in static and dynamic pressure inside the TURBOsplash PAC fill material/evaporative panels, depending on the speed of the air. CFD Processing
We like to thank everyone for visiting our blog and have shared our experience in Cooling Tower industry. Up to today, our blog “Cooling Tower“, containing 84 posts, was seen approximately by 3000 visitors 7000 times, of which some visited the blog Read More
