A record in technology with TURBOsplash PAC ®™ in cooling towers – Abstract

Water and air, these two elements have been used by mankind for thousands of years to improve their lives. Moreover, thanks to intelligent research and applications, these two natural elements have learned to live together influencing the evolution of humanity itself.
In fact, from prehistoric times to the present day, mankind has tried to exploit the capabilities of these two elements in every way possible; for example, by compressing them and mixing them, hence, allowing to use these characteristics in the fundamental processes of transformation.

The following diagram is an example of what happens in cooling towers when water is cooled by air:

Heating and cooling temperature domain systems were amongst the first applications to be used. These methods were based on the water evaporation phenomenon. The principle is still used today for making cooling tower function.

Other applications include electric power plants, industrial plants, greenhouses for agriculture, mining, etc.; but, often there is the problem of how to dispose of unused heat. In most cases this heat is disposed with water taken from rivers, sea, lakes.
Until a few decades ago, the heated water was taken back to the supply source. This approach caused an environmental impact too great for the community and, furthermore, considerable waste of energy. So, the concern was how to dissipate the heat without causing environmental damage and violating existing laws. This was a major issue in the industry world. What to do?
There were two alternatives:
(i) F‏irst, adopting a cooling “dry” system, for which it is necessary to use large quantities of air. In case of large plants, this would mean moving huge volumes of air with subsequent construction of complex surfaces for the exchange of heat.
(ii) Second, adopting a cooling “water” system that uses a mixture of air and water. The cooling water circulates in the system absorbing the heat. Hence, sent in cooling towers, it will come in contact with the air and, as a consequence, it cools down through evaporation (mass transfer). 
A cooling tower is an indispensable device for a lot of industries. In fact, they are the most economical solution because, thanks to water recycling, they allow for a low cost capital investment. This is precisely the reason why the tower plays an important and challenging role for obtaining an efficient cooling tower that is most economical.
The most important component of the cooling tower is the filling material, because it’s decisive when it comes to increasing the contact surface and, hence, increasing the heat exchange interface between the two elements, air and water. Thus, having a good filler material means improving the performance of the same tower.

One Thought to “A record in technology with TURBOsplash PAC ®™ in cooling towers – Abstract”

  1. mustafakhanani

    Water cooling is a method of heat removal from components and industrial equipment. Water may be a more efficient heat transfer fluid where air cooling is ineffective. In most occupied climates water offers the thermal conductivity Water is inexpensive, non-toxic, and available over most of the earth's surface. Liquid cooling offers higher thermal conductivity than air cooling. Water has unusually high specific heat capacity among commonly available liquids at room temperature and atmospheric pressure allowing efficient heat transfer over distance with low rates of mass transfer. Cooling water may be recycled through a recirculating system or used in a single pass once-through cooling (OTC) system. Water's high enthalpy of vaporization allows the option of efficient evaporative cooling to remove waste heat in cooling towers or cooling ponds.[3] Recirculating systems may be open if they rely upon evaporative cooling or closed if heat removal is accomplished in heat exchangers with negligible evaporative loss. A heat exchanger or condenser may separate non-contact cooling water from a fluid being cooled,[4] or contact cooling water may directly impinge on items like saw blades where phase difference allows easy separation. Environmental regulations emphasize the reduced concentrations of waste products in non-contact cooling water.advantages of a liquid with unusually high specific heat capacity and the option of evaporative cooling. Low cost often allows rejection as waste after a single use, but recycling coolant loops may be pressurized to eliminate evaporative loss and offer greater portability and improved cleanliness. Unpressurized recycling coolant loops using evaporative cooling require a blowdown waste stream to remove impurities concentrated by evaporation. Disadvantages of water cooling systems include accelerated corrosion and maintenance requirements to prevent heat transfer reductions from biofouling or scale formation. Chemical additives to reduce these disadvantages may introduce toxicity to wastewater.circulating cooling water is commonly used for cooling automobile internal combustion engines and large industrial facilities such as nuclear and steam electric power plants, hydroelectric generators, petroleum refineries and chemical plants.[1] Other uses include cooling the barrels of machine guns, cooling of lubricant oil in pumps; for cooling purposes in heat exchangers; cooling products from tanks or columns; for cooling in HVAC in chillers , and recently, cooling of various major components inside high-end personal computers such as CPUs, GPUs, and motherboards. The main mechanism for water cooling is convective heat transfe

Leave a Comment